Zhejiang Wellnit Mechanical Technology Co.,Ltd
Zhejiang Wellnit Mechanical Technology Co.,Ltd Adhered to customer satisfaction as the goal, to pioneering innovation as the driving force, to honesty and trust worthiness as the principle, to quality
Add to Cart
Automatic Marching Steel Plate Edge Milling Machine 4800W AC 380V 50Hz
Product Introduction
PB-80 automatic marching milling machine is a dual-motor, power upgrade, automatic steel plate milling
machine, stainless steel plate, carbon steel plate, aluminum alloy plate and other different materials can
be used, for large plates, to build a workbench, the machine on both sides of the plate can be carried out
simultaneously. The machine is easy to operate and can be processed at the same time without manual
assistance after adjustment. It has high efficiency and saves time and labor costs.
Technical Parameter
|
Model
|
PB-80
|
Slope Angle
|
0°-60°(Adjustable)
|
|
Power
|
AC 380V 50Hz |
Clamp Thickness |
6-60mm |
|
Total
|
4800W |
Clamp Width |
〉100mm |
|
Spindle Speed
|
750-1050r/min (adjustadle) |
Process Length |
〉300mm |
|
Feed speed
|
0~1500mm/min (adjustadle) |
Worktable Height |
820-860mm |
|
Milling Width
|
0-70mm |
Net Weight |
220kg |
|
Single Milling
Width
|
15-20mm |
Processing Materials |
Carbon Steel
Stainless Steel
Aluminium Alloy , Etc |
Main performance of the product
1. The PB-80 edge milling machine convenient movement and simple operation.
2. The finish of the groove is as high as Ra3.2-6.3.
3. The milling machine is equipped with commonly used CNC blades to make the
customers use the cost more cheaply.
Details of Product
The plastic handle in the picture is used to adjust the height of the machine, adjust the handle, and
contact the rubber wheel with the upper part of the steel plate.
On the control panel, there are spindle switch, feed switch, spindle speed, feed speed, power indicator
and emergency stop.
Operation procedure:
One Step: turn on the power.
Second Step: turn the spindle switch to ON, and the feed switch rotates to L.
Third step: start the spindle speed to 1300, and feed speed to 300.
After the plate is completely pressed, the feed rate and feed speed can be adjusted according to the
sound of the motor.